Sourcing from a medical examination gloves manufacturer for medical examination dental care and laboratory in Southeast Asia is less about finding the longest product list and more about matching a specific glove to a specific task, then confirming the paperwork that lets it enter your market. This article walks through the practical decisions a distributor, clinic group, dental supplier or laboratory buyer in the region typically faces — material, texture, thickness, cuff, packing and logistics — and shows where the numbers are only reference values that must be confirmed before you commit.
Start with the task, not the catalogue
Examination, dental and laboratory work place different demands on a glove. Rather than assuming one glove fits all three, compare the material and construction against what the wearer actually does:
- Examination and general clinical contact usually prioritises tactile sensitivity, a consistent fit and reliable barrier behaviour during short procedures.
- Dental care often involves wet, instrument-heavy work where grip and cuff behaviour matter, and where splashes are common.
- Laboratory work may involve longer wear, chemical exposure or handling of small items, so the buyer should check the glove against the specific substances and tasks in their own protocols.
Junda's approved product context covers examination, sterile unit-packed and surgical program directions. It does not claim universal suitability for every task, so treat any material or thickness choice as something to validate against your own procedures and, where required, your local regulatory expectations.
Nitrile vs latex: a procurement comparison
Two common examination references are standard 9-inch nitrile and standard 9-inch natural latex. The table below uses Junda's reference-sheet values, which are model-specific and indicative, not universal specifications.
| Reference | Material | Length | Reference piece weights | Typical reference packing (size M) |
|---|---|---|---|---|
| Standard 9-inch nitrile | Nitrile | 24 cm | 3.5 g, 5 g or 6 g (model-dependent) | 100 pcs/box, 10 boxes/carton (1,000 pcs) |
| Standard 9-inch latex examination / food-handling | Natural latex | 24 cm | 6.3 g and 5.0 g (size M) | 100 pcs/box, 10 boxes/carton (1,000 pcs) |
For buyers weighing nitrile options, see the medical nitrile examination gloves range. Where single-unit or pair packing is required for a project, the sterile unit-packed gloves direction can be discussed, but exact pieces, pairs and sterilization requirements must be confirmed.
Piece weight, net weight and carton gross weight are not the same thing
A frequent source of confusion in quotations is weight. Keep three figures separate:
- Piece weight — the weight of a single glove, e.g. a 4.0 g nitrile glove.
- Net weight — the glove content of a carton, roughly piece weight multiplied by pieces per carton.
- Carton gross weight — the full shipping weight including gloves, boxes, polybags and the carton itself.
Using the reference packing above, a nitrile 4.0 g carton (1,000 pcs) is listed at approximately 4.5 kg gross, while a nitrile 3.5 g carton is approximately 4.0 kg gross. For latex, the 6.3 g reference carton is approximately 6.8 kg gross and the 5.0 g reference carton approximately 5.5 kg gross. These are indicative figures only — confirm the current packing list and carton measurements for the exact SKU before you calculate freight or warehouse costs.
Container loading: plan around cartons, not assumptions
Container loading depends on carton dimensions and how the cartons actually stack. The reference values below are approximate and subject to actual loading:
- Nitrile: 20GP approx. 1,650–1,800 cartons; 40GP approx. 3,350–3,650; 40HQ approx. 3,800–4,150.
- Latex 6.3 g: 20GP approx. 1,252 cartons; 40GP approx. 2,542; 40HQ approx. 2,883.
- Latex 5.0 g: 20GP approx. 2,006 cartons; 40GP approx. 4,074; 40HQ approx. 4,621.
Because these depend on the exact SKU, size mix and packing configuration, always ask for the confirmed container loading for your order rather than extrapolating from a reference sheet.
What actually drives the unit price
Junda does not publish a numeric lowest unit price, because unit price depends on several variables that change order by order:
- material and piece weight
- size mix
- box and carton configuration
- artwork and branding
- order quantity
- destination port and freight terms
- the Incoterm you require
To get an accurate quotation, confirm the exact SKU, quantity, packaging, destination and Incoterm with the team. MOQ for disposable gloves follows full-container terms — 40HQ, 40GP or 20GP (40FT = 40GP) — while latex protective gloves carry a 10,000-pair MOQ under JUNDA brand or OEM. Lead time is 15–30 days, with the exact date confirmed with the order. Payment terms follow the quotation or contract. For the full set of buying terms, see /buying.
Samples, certificates and market access
Samples are free; the buyer's own international courier collects them from the Guangzhou factory and the buyer pays the courier directly. Contact the team by email or WhatsApp before booking the courier. Certificates are shown as masked previews on the Quality page, with full documents available on request.
A critical point for Southeast Asian buyers: registration, sterilization, standards and market access must be confirmed product by product and market by market. Logos or certification marks visible in promotional artwork are not proof of current certification. Always request the actual documents for the exact SKU and destination market before quotation or shipment.
A practical checklist before you request a quote
- Define the task (examination, dental, laboratory) and any chemical or duration requirements.
- Choose material and reference piece weight, then confirm the exact SKU.
- Confirm size mix, box and carton configuration, and whether unit-packed or pair packing is needed.
- Request the current packing list, carton dimensions and gross weight.
- Confirm container loading for your chosen container.
- State destination, Incoterm and required market documents.
- Request samples and certificate previews, then ask for a formal quotation.
Working through these steps with a manufacturer keeps the conversation grounded in verified figures rather than assumptions — which is exactly what a commercial buyer in Southeast Asia needs when comparing suppliers.
This article was prepared with automation assistance and reviewed against Junda's product and export-content rules.
