When a distributor, dental group or laboratory supply team in South Korea starts looking for a medical examination gloves manufacturer for medical examination dental care and laboratory in South Korea, the first question is rarely "which glove is cheapest". It is usually "which glove fits the task, the packing line and the import file". This guide sets out the practical checks we recommend before you request a quotation, and explains where Junda can support your project and where the buyer must confirm details product by product and market by market.
Start with the task, not the material name
Examination, dental and laboratory work overlap, but they do not place identical demands on a glove. Before comparing suppliers, write down what the wearer actually does:
- Duration of wear. Short chairside procedures and longer laboratory bench sessions may call for different thickness and fit preferences.
- Tactile need. Fine dental work and small-instrument handling reward a close fit; heavier wet work may favour a thicker reference weight.
- Chemical and contact exposure. Laboratory tasks vary widely. The buyer should match the glove to the specific substances and tasks involved, and confirm suitability with the manufacturer rather than assuming one glove covers every chemical.
- Sterility requirement. Non-sterile examination gloves, sterile unit-packed gloves and surgical directions are different product programmes. They should not be treated as interchangeable.
- Cuff and texture preference. Cuff length, surface texture and grip pattern are selection points to discuss against the actual task, not universal guarantees.
Junda's approved product context covers examination, sterile unit-packed and surgical programme directions. Which of these is right for a given South Korean buyer depends on the end use, the facility's procedures and the documents the destination market requires — all of which must be confirmed product by product.
Nitrile or latex: a procurement comparison
Both materials appear in examination and professional use. The right choice depends on the buyer's task and user preferences, not on a general claim that one is always better.
Nitrile references (model-specific, indicative): a standard 9-inch nitrile reference lists a 24 cm length, with model-dependent 3.5 g, 5 g or 6 g options. Nitrile is often considered where the buyer wants a powder-free synthetic option; confirm the exact SKU and its current specification sheet before you plan.
Latex references (model-specific, indicative): a standard 9-inch latex examination/food-handling reference lists natural latex and a 24 cm length, with reference weights of 6.3 g/pc and 5.0 g/pc in size M.
These are reference-sheet values supplied for planning, not universal specifications. Piece weight, thickness, texture and cuff should all be checked against the buyer's real task before a decision is made. You can review the relevant product directions here: medical nitrile examination gloves and sterile unit-packed gloves.
Packing, carton size and container planning
Logistics questions are where many first quotations go wrong, because buyers compare carton counts without checking piece weight and configuration. The values below are indicative reference packing for size M, subject to actual loading. Always confirm the current packing list, carton measurements, gross weight and container loading before quotation or shipment.
| Reference | Pieces per carton | Carton size (cm) | Gross weight (approx.) | Container guide (cartons) |
|---|---|---|---|---|
| Nitrile 4.0 g | 1,000 (100/box × 10) | 36.5 × 23.5 × 23.5 | 4.5 kg | 20GP ≈ 1,650–1,800; 40GP ≈ 3,350–3,650; 40HQ ≈ 3,800–4,150 |
| Nitrile 3.5 g | 1,000 (100/box × 10) | 32.5 × 23 × 22 | 4.0 kg | as above range applies to nitrile programme |
| Latex 6.3 g | 1,000 (100/box × 10) | 39 × 26.5 × 25.5 (0.0264 m³) | 6.8 kg | 20GP ≈ 1,252; 40GP ≈ 2,542; 40HQ ≈ 2,883 |
| Latex 5.0 g | 1,000 (100/box × 10) | 32.5 × 23 × 22 (0.0164 m³) | 5.5 kg | 20GP ≈ 2,006; 40GP ≈ 4,074; 40HQ ≈ 4,621 |
Keep three weights separate in your own comparison sheet:
- Piece weight — the reference weight of a single glove, which drives feel and material use.
- Net weight — the glove content of a carton, before packaging.
- Carton gross weight — what actually moves and what freight is charged on.
Mixing these up is a common reason a landed-cost estimate drifts. Unit-packed two-piece or pair packaging can be discussed as a project option; exact pieces, pairs and sterilization requirements must be confirmed for your order.
Documents, standards and market access
For South Korea, import and healthcare buyers typically need to see current registration and standards documentation that matches the exact product. Junda publishes masked certificate previews on the Quality page, and full documents are available on request. Two cautions matter here:
- Logos and marks in promotional artwork are not proof of current certification. Always request the live document for the specific SKU.
- Registration, sterilization, standards and market access must be confirmed product by product and market by market. A document that covers one glove model does not automatically cover another.
Build a simple document checklist with your supplier: which SKU, which standard, which registration, which language, and which validity date. Then verify each line before the order is placed.
MOQ, samples, lead time and quotation variables
Junda's buying terms are straightforward:
- MOQ: disposable gloves are quoted by full container — 40HQ / 40GP / 20GP (40FT means 40GP). Latex protective gloves have an MOQ of 10,000 pairs (JUNDA brand or OEM).
- Samples: free. The buyer's own international courier collects from our Guangzhou factory and the buyer pays the courier directly. Please contact us by email or WhatsApp before booking.
- Lead time: 15–30 days; the exact date is confirmed with the order.
- Payment: follows the quotation and contract.
On price, we do not publish a numeric lowest unit price, because unit price depends on material, piece weight, size mix, box and carton configuration, artwork, order quantity, destination and freight terms. To get a usable quotation, send your exact SKU, quantity, packaging preference, destination port and Incoterm. More detail on how we quote is on the buying page.
A short pre-quotation checklist for South Korean buyers
- Define the task: examination, dental chairside, laboratory, or a mix.
- Choose material direction and confirm the exact SKU and reference weight.
- Decide sterile or non-sterile, and whether unit-packed packaging is needed.
- Confirm the current packing list, carton size, gross weight and container loading.
- List the documents your market and facility require, and request live copies.
- Send quantity, destination and Incoterm so the quotation is comparable.
Working through these six points before you compare suppliers usually saves more time than chasing the last fraction of a cent on a unit price.
This article was prepared with automation assistance and reviewed against Junda's product and export-content rules.
