Sourcing from a medical examination gloves manufacturer for medical examination dental care and laboratory in Russia is not a single-product decision. Examination rooms, dental chairs and laboratory benches place different demands on material, texture, thickness and cuff, and the paperwork that travels with each carton must match the destination market. This guide sets out what a European buyer should confirm before requesting a quotation, and which values are model-specific rather than universal.

Start with the task, not the product name

"Examination glove" covers a wide range. Before comparing suppliers, map the actual use:

  • Medical examination: tactile sensitivity and a consistent fit matter more than heavy-duty protection. Nitrile is often chosen where latex sensitivity is a concern; latex remains common where elasticity and cost balance are priorities.
  • Dental care: short, precise procedures reward good fingertip feel and a secure cuff. Glove changes are frequent, so box configuration and dispensing matter as much as the glove itself.
  • Laboratory: the task decides. Handling solvents, powders or sharps is a different question from routine sample handling, and no single material is universally suitable. Compare material, texture, thickness and cuff length against your own protocol rather than assuming a "best" glove.

Junda's approved product context covers examination, sterile unit-packed and surgical program directions. Registration, sterilization, standards and market access must be confirmed product by product and market by market — they are not implied by the product category.

Material and specification choices to confirm

For nitrile, a standard 9-inch reference is 24 cm in length, with model-dependent 3.5 g, 5 g or 6 g options. For latex examination and food-handling reference, natural latex at 24 cm length is quoted at reference weights of 6.3 g/pc and 5.0 g/pc (size M).

These are reference-sheet values, not universal specifications. Piece weight is not the same as net weight, and neither is the same as carton gross weight. Confirm the exact SKU, current packing list, carton measurements, gross weight, container loading and destination-market documents before quotation or shipment.

Relevant product pages:

Unit-packed two-piece or pair packaging can be discussed as a project option. Exact pieces, pairs and sterilization requirements must be confirmed for your program.

Packing and container planning: use indicative figures, then verify

Reference packing for size M (approximate, subject to actual loading) is 100 pcs/box, 10 boxes/carton (1,000 pcs).

  • Nitrile 4.0 g: carton 36.5 × 23.5 × 23.5 cm, gross approx. 4.5 kg.
  • Nitrile 3.5 g: carton 32.5 × 23 × 22 cm, gross approx. 4.0 kg.
  • Nitrile cartons per container: 20GP approx. 1,650–1,800; 40GP approx. 3,350–3,650; 40HQ approx. 3,800–4,150.
  • Disposable latex 6.3 g: box 24 × 12.5 × 7.5 cm; carton 39 × 26.5 × 25.5 cm, 0.0264 m³, gross approx. 6.8 kg; 20GP approx. 1,252, 40GP approx. 2,542, 40HQ approx. 2,883 cartons.
  • Disposable latex 5.0 g: carton 32.5 × 23 × 22 cm, 0.0164 m³, gross approx. 5.5 kg; 20GP approx. 2,006, 40GP approx. 4,074, 40HQ approx. 4,621 cartons.

Treat every number above as model-specific and indicative. Size mix, artwork and carton configuration change the loading, so ask for the current packing list for your exact SKU.

Price, MOQ and quotation variables

There is no single "lowest unit price" that applies across materials and markets. Unit price depends on material, piece weight, size mix, box and carton configuration, artwork, order quantity, destination and freight terms.

Disposable gloves MOQ is by full container — 40HQ / 40GP / 20GP (40FT = 40GP). Latex protective gloves MOQ is 10,000 pairs (JUNDA brand or OEM).

To get a usable quotation, confirm the exact SKU, quantity, packaging, destination and Incoterm. Payment arrangements follow the quotation and contract. For buying-term questions, see /buying.

Samples, lead time and documents

Samples are free; the buyer's own international courier collects them from our Guangzhou factory and the buyer pays the courier directly. Contact us by email or WhatsApp before booking the courier.

Lead time is 15–30 days, with the exact date confirmed with the order.

Certificates: masked previews are shown on the Quality page, and full documents are available on request. Logos or certification marks visible in artwork are not proof of current certification — always request the documents for the specific product and destination market.

A practical checklist before you commit

  1. Define the task for each glove type (examination, dental, laboratory) and the material, texture, thickness and cuff that fit it.
  2. Request the current packing list and confirm piece weight, net weight and carton gross weight separately.
  3. Confirm container loading for your actual size mix and carton configuration.
  4. Ask which registration, sterilization and standards documents apply to your SKU and destination market.
  5. Confirm SKU, quantity, packaging, destination and Incoterm before requesting price.

This article was prepared with automation assistance and reviewed against Junda's product and export-content rules.