When buyers in Asia search for a medical examination gloves manufacturer for medical examination dental care and laboratory in Japan, they are usually not looking for a single glove. They are looking for a supplier who can match different tasks — a routine examination, a dental procedure, a laboratory bench — with the right material, packing format and documentation, then confirm it product by product. This article sets out a practical way to compare suppliers and prepare a quotation request that avoids surprises later.

Start with the task, not the product name

"Examination glove" covers a wide range of use conditions. Before comparing suppliers, write down what the glove actually has to do:

  • Contact duration and risk level. Short, low-risk contact differs from procedures with more exposure. This affects whether a standard examination glove is enough or whether a sterile, unit-packed format is needed.
  • Material sensitivity. Nitrile is a common choice where latex sensitivity is a concern; natural latex remains widely used where fit and elasticity matter. Confirm the buyer's own requirements rather than assuming.
  • Texture and grip. Dental and laboratory work often involves wet or slick instruments. Ask about surface texture and whether the supplier offers a consistent feel across sizes.
  • Thickness and piece weight. A heavier glove feels different from a lighter one. Piece weight is a useful comparison point, but it is model-specific — see the reference values below.
  • Cuff length and fit. Standard 9-inch references suit many tasks; longer cuffs may be relevant where more wrist coverage is wanted. Confirm against the actual task.

No single glove is universally suitable. The right approach is to match material, texture, thickness and cuff to the buyer's own procedures, then verify with samples.

Examination, sterile unit-packed and surgical directions

Junda's approved product context covers examination, sterile unit-packed and surgical program directions. These are different program directions, not interchangeable labels. Registration, sterilization, standards and market access must be confirmed product by product and market by market — including for Japan. Buyers should ask for the exact documents tied to the exact SKU they intend to order, and should not treat certification marks visible in promotional artwork as proof of current certification.

Relevant product pages to review:

Unit-packed two-piece or pair packaging can be discussed as a project option. Exact pieces, pairs and sterilization requirements must be confirmed before quotation.

Reference specifications: use them as a starting point, not a promise

The values below are user-supplied reference-sheet values, not universal specifications. They help buyers understand relative differences, but the exact SKU, current packing list, carton measurements, gross weight, container loading and destination-market documents must be confirmed before quotation or shipment.

Standard 9-inch nitrile reference: 24 cm length; model-dependent 3.5 g, 5 g or 6 g options.

Nitrile reference packing (size M, approximate, subject to actual loading): 100 pcs/box, 10 boxes/carton (1,000 pcs).

  • Nitrile 4.0 g: carton 36.5 × 23.5 × 23.5 cm, gross approx. 4.5 kg.
  • Nitrile 3.5 g: carton 32.5 × 23 × 22 cm, gross approx. 4.0 kg.
  • Cartons per container (nitrile): 20GP approx. 1,650–1,800; 40GP approx. 3,350–3,650; 40HQ approx. 3,800–4,150.

Standard 9-inch latex examination / food-handling reference: natural latex, 24 cm length; reference weights 6.3 g/pc and 5.0 g/pc (size M).

Latex reference packing (size M, approximate, subject to actual loading): 100 pcs/box, 10 boxes/carton (1,000 pcs); box 24 × 12.5 × 7.5 cm.

  • Disposable latex 6.3 g: carton 39 × 26.5 × 25.5 cm, 0.0264 m³, gross approx. 6.8 kg; 20GP approx. 1,252, 40GP approx. 2,542, 40HQ approx. 2,883 cartons.
  • Disposable latex 5.0 g: carton 32.5 × 23 × 22 cm, 0.0164 m³, gross approx. 5.5 kg; 20GP approx. 2,006, 40GP approx. 4,074, 40HQ approx. 4,621 cartons.

Piece weight, net weight and carton gross weight are different things

This is a common source of confusion in glove procurement:

  • Piece weight is the weight of one glove (for example, 3.5 g or 4.0 g). It is a model characteristic, not a quality grade by itself.
  • Net weight is the total glove weight in a carton — roughly piece weight × pieces, before packaging.
  • Carton gross weight includes gloves, boxes, polybags and the carton itself. The reference gross weights above are carton-level figures.

When comparing suppliers, make sure you are comparing the same number. A lower piece weight can reduce freight cost per glove, but it also changes the feel and may not suit every task.

MOQ, samples and lead time

  • MOQ: disposable gloves are quoted by full container — 40HQ / 40GP / 20GP (40FT = 40GP). Latex protective gloves have an MOQ of 10,000 pairs (JUNDA brand or OEM).
  • Samples: free. The buyer's own international courier collects them from our Guangzhou factory and the buyer pays the courier directly. Please contact us by email or WhatsApp before booking the courier.
  • Lead time: 15–30 days; the exact date is confirmed with the order.

For buying-term questions, see /buying.

Why price needs a proper quotation

You will not get a meaningful unit price from a single number. Unit price depends on material, piece weight, size mix, box and carton configuration, artwork, order quantity, destination and freight terms. That is why a numeric "lowest unit price" is not stated here — it would not reflect your actual order.

To get a quotation you can compare, send:

  1. The exact SKU or product direction (examination, sterile unit-packed, surgical program).
  2. Material and piece weight preference.
  3. Size mix and estimated quantity.
  4. Box and carton configuration, plus any artwork requirements.
  5. Destination port or market, and the Incoterm you want to quote on.

Payment terms follow the quotation and contract.

A practical checklist for Japanese and Asian buyers

  • Confirm the exact SKU and the current packing list — do not rely on an old reference sheet.
  • Ask for the destination-market documents relevant to your product and confirm them product by product.
  • Request samples and test them against your actual tasks (dental, laboratory, examination) before committing.
  • Check carton dimensions and gross weight against your warehouse and freight assumptions.
  • Confirm container loading figures rather than estimating from a single carton.
  • Keep artwork and certification questions separate: a logo in a design file is not a verified certificate.

Junda supplies medical and professional gloves to B2B buyers across Asia. If you are sourcing for medical examination, dental care or laboratory use in Japan, contact us by email or WhatsApp with the details above and we will confirm what can be offered for your exact requirement.

This article was prepared with automation assistance and reviewed against Junda's product and export-content rules.