If you are sourcing for a distributor, safety supplier or industrial end user in New Zealand, the practical question is rarely "what is the price" — it is "what is the lowest unit price MOQ and quotation for industrial protective gloves in New Zealand that I can actually plan a container around?" This article explains what drives that number, which packing and carton values you should confirm before you commit, and how to send a request that gets a usable quotation back quickly.

Junda Gloves is a B2B glove manufacturer and exporter. We do not publish a single "lowest price" figure, because unit price is not a fixed property of a glove — it moves with the specification and the shipment. Below is how to pin it down.

Why there is no single "lowest unit price"

A quoted unit price depends on several variables that buyers control or can negotiate:

  • Material and construction — latex protective versus heavier disposable nitrile are different cost structures, and construction, grip and cuff vary by model.
  • Piece weight — a heavier glove uses more compound. Piece weight is not the same as net weight or carton gross weight; see the section below.
  • Size mix — the ratio of S/M/L/XL in a carton affects packing efficiency and therefore cost per pair.
  • Box and carton configuration — pieces per box, boxes per carton, and whether you need retail-ready artwork.
  • Artwork and branding — OEM printing, logo placement and packaging design add setup and material cost.
  • Order quantity — larger, container-based orders spread fixed costs further.
  • Destination and freight terms — New Zealand port, delivery address and Incoterm (for example FOB versus CIF) change the landed comparison.

Because these interact, the honest answer to "what is your lowest unit price" is: send us the specification and volume, and we will quote against it. We do not state a numeric lowest unit price unless a current approved quotation has been issued for your exact requirement.

MOQ: what applies to each product line

Our buying terms are straightforward:

  • Disposable gloves — MOQ is by full container: 40HQ / 40GP / 20GP (40FT means 40GP). We do not quote per-size or per-colour minimums for this line; the container is the unit.
  • Latex protective gloves — MOQ is 10,000 pairs, available under the JUNDA brand or as OEM.

If your New Zealand order is smaller than a full container of disposables, the latex protective line with its 10,000-pair minimum is often the more practical entry point. For the full terms, see /buying.

Packing, carton and weight data to confirm before you quote

The values below are model-specific reference specifications supplied to us — not universal specifications. They are indicative and must be confirmed against the exact SKU, current packing list, carton measurements, gross weight and container loading before quotation or shipment.

Heavy-duty orange diamond-texture nitrile (reference):

  • 7–8 g/pc; 50 pcs/box; 10 boxes/carton
  • Box: 24 × 12.5 × 7.5 cm; carton: 39 × 26.5 × 25.5 cm
  • Indicative carton weight about 4.5 kg

Latex protective gloves (reference, one pair per bag, sizes S/M/L):

LengthWeight per pairPairs/cartonCarton size (cm)VolumeN.W. / G.W.20GP / 40GP / 40HQ (approx. cartons)
32 cm60–110 g (custom OEM range)20059 × 37 × 24.50.0535 m³20 kg / 22 kg617 / 1,252 / 1,421
38 cm90–130 g20060 × 45 × 25.50.0689 m³22 kg / 24 kg479 / 973 / 1,103
45 cm120–140 g15050 × 30 × 400.06 m³21 kg / 23 kg550 / 1,116 / 1,266
55 cm170–200 g15065 × 35 × 350.0796 m³28.5 kg / 30.5 kg414 / 841 / 954

Carton data is based on standard weight and is approximate, subject to actual loading. Container counts are indicative and depend on final carton dimensions and how the container is loaded.

Piece weight, net weight and carton gross weight are three different things

Buyers comparing quotes often mix these up, and it leads to bad landed-cost maths:

  • Piece weight — the weight of one glove (or one pair), e.g. 7–8 g/pc for the nitrile reference or 60–110 g/pair for the 32 cm latex reference.
  • Net weight (N.W.) — the total weight of the gloves in a carton, excluding packaging.
  • Gross weight (G.W.) — the full carton weight including boxes, bags and carton board. This is what freight and handling are based on.

Always quote against gross weight and confirmed carton volume when you calculate freight to New Zealand.

Matching the glove to the task (so you don't overpay)

The cheapest glove that fails on the job is the most expensive glove you can buy. Compare the options against your actual task:

  • Latex protective — a general fit for industrial cleaning, maintenance and wet-work where flexibility and grip matter. Cuff length (32/38/45/55 cm) should match how much forearm splash or immersion protection the task needs.
  • Heavier disposable nitrile — often chosen for automotive, oil-handling and maintenance tasks where resistance to oils and punctures is a priority, and where a diamond texture aids grip.

Select material, piece weight and texture according to the oil, wet-grip, mechanical and cleaning demands of the task. Product suitability requires task-specific assessment — we will not claim a glove is universally suitable for every application. See the product pages for /products/junda-lanlang-industrial-latex-gloves and /products/disposable-nitrile-gloves.

Documentation and certification: confirm, don't assume

Certification and market-access documents must be confirmed by product and by destination market. Logos or certification marks that appear in promotional artwork are not proof of current certification. Masked previews are available on our Quality page, and full documents can be provided on request — but always confirm the exact document set your New Zealand importer or customer requires before you order.

How to get a fast, usable quotation

Send us an email or WhatsApp message with the following, and we can quote without a long back-and-forth:

  1. Exact SKU or product (latex protective or disposable nitrile, and the model/length).
  2. Quantity — pairs or cartons, and whether it is a full container.
  3. Size mix and any colour requirements.
  4. Packaging — pieces per box, boxes per carton, and whether you need OEM artwork.
  5. Destination — New Zealand port or delivery address.
  6. Incoterm — FOB, CIF or another term you work on.

Samples: free. Your own international courier collects them from our Guangzhou factory and you pay the courier directly. Please contact us by email or WhatsApp before booking the collection.

Lead time: 15–30 days; the exact date is confirmed with the order.

Payment: terms follow the quotation and contract.

Contact us by email or WhatsApp to start a quotation. For buying-term questions, see /buying.

This article was prepared with automation assistance and reviewed against Junda's product and export-content rules.