Sourcing from a household cleaning gloves manufacturer for kitchen dishwashing janitorial and wet cleaning in New Zealand means matching a small number of glove formats to several very different end uses: a domestic sink, a commercial kitchen, a school or hospital cleaning trolley, and general wet-area work. This guide is written for importers, distributors and private-label buyers who need to compare latex household programs on material, cuff length, piece weight and carton logistics before requesting a quotation.

Start with the task, not the catalogue

Household cleaning gloves are not one product. The same factory line can produce regular, flock-lined and long-cuff directions, and each direction suits a different buyer. Before choosing a SKU, map your channel:

  • Kitchen and dishwashing (retail): short-to-medium cuff, comfortable fit, retail-ready pair bagging. Buyers usually care about shelf presentation and size runs more than about heavy-duty thickness.
  • Household general cleaning: similar to kitchen, but often sold in multi-packs or value packs where carton economics matter.
  • Janitorial and contract cleaning: longer cuffs and a more robust feel are usually preferred, because the glove is worn for longer periods and splashes travel further up the forearm.
  • Wet cleaning and food-processing-adjacent tasks: buyers should confirm with their own customers whether a latex glove is acceptable for the specific task, especially where latex sensitivity is a concern in the workforce.

Junda's approved product context covers natural-latex household programs in regular, flock-lined and long-cuff directions for kitchen, household and janitorial channels, with model-specific size, colour and packaging options. It does not claim universal suitability for every task, and neither should your specification sheet.

Flock-lined versus unlined: a real procurement decision

Flock lining is a cotton-like inner surface that changes how the glove feels and how it is used. In practical terms:

  • Flock-lined gloves are easier to put on and take off repeatedly and tend to feel drier against the skin during longer wear. They are often chosen for janitorial and general household cleaning where the glove goes on and off many times a day.
  • Unlined (regular) latex gloves are simpler to manufacture and typically suit shorter dishwashing and light household tasks where cost per pair is the dominant factor.

Neither is "better" in the abstract. Ask your customers how long the glove is worn continuously, whether hands are wet when donning, and whether the glove is reused across shifts. The answers usually decide the lining question before price is discussed.

Two starting points in the current range are the Yuelong Y3 household latex gloves and the household flock-lined latex gloves. Confirm the exact SKU and current specification sheet with the export team before you build a purchase order around either one.

Cuff length: the specification buyers most often get wrong

Cuff length drives both the end-use fit and the shipping maths. The reference specifications below are model-specific and indicative, supplied as reference-sheet values rather than universal specifications. They must be confirmed against the exact SKU and current packing list before quotation or shipment.

Cuff lengthPiece weight (per pair)Pairs per cartonCarton size (cm)N.W. / G.W. (kg)20GP / 40GP / 40HQ (cartons, approx.)
32 cm60–110 g (custom OEM range)20059 × 37 × 24.5 (0.0535 m³)20 / 22617 / 1,252 / 1,421
38 cm90–130 g20060 × 45 × 25.5 (0.0689 m³)22 / 24479 / 973 / 1,103
45 cm120–140 g15050 × 30 × 40 (0.06 m³)21 / 23550 / 1,116 / 1,266
55 cm170–200 g15065 × 35 × 35 (0.0796 m³)28.5 / 30.5414 / 841 / 954

Read this table carefully, because three different weights appear and buyers routinely confuse them:

  • Piece weight is the weight of one pair of gloves. It is a thickness/feel indicator, not a carton weight.
  • Net weight (N.W.) is the total glove weight in the carton.
  • Gross weight (G.W.) includes gloves plus polybags, inner packing and the carton itself. This is the figure your freight forwarder and customs broker need.

Note also that the 32 cm line is quoted as a custom OEM weight range, while the longer lengths are quoted as fixed ranges. Container counts are approximate and subject to actual loading, so treat them as planning figures, not commitments.

Why New Zealand buyers should think in cubic metres

New Zealand is a long-haul destination with relatively thin consolidation options compared with Europe or North America. That makes carton cube as important as carton count. Compare the 32 cm carton at 0.0535 m³ with the 55 cm carton at 0.0796 m³: the long-cuff glove carries roughly 50% more volume per carton while holding 25% fewer pairs. If your janitorial customers need long cuffs but your margin is tight, that volume difference is a real cost line, not a detail.

Practical steps for NZ-bound orders:

  1. Decide the cuff mix by channel first, then calculate cube per channel rather than averaging across the whole order.
  2. Ask for the current packing list and carton measurements for each SKU you intend to buy — do not rely on a previous shipment's numbers.
  3. Confirm destination-market documents with your broker. Junda can supply documents on request, but import requirements for New Zealand must be verified for your specific product and destination; nothing in promotional artwork should be read as proof of current certification or regulatory status.
  4. Confirm freight terms and Incoterm before comparing quotes, because a lower unit price on ex-works terms can be more expensive landed.

What actually drives the unit price

There is no single lowest unit price for household cleaning gloves, and any supplier who quotes one before knowing your specification is guessing. Unit price depends on:

  • material and lining direction (regular versus flock-lined)
  • piece weight within the approved range
  • size mix across S/M/L
  • box and carton configuration, including pair bagging and inner packing
  • artwork and private-label requirements
  • order quantity
  • destination and freight terms

For a firm number, send the exact SKU, quantity, packaging requirement, destination port and required Incoterm, and request a quotation. The team will quote against those variables rather than against an average.

MOQ, samples and lead time

  • MOQ: latex protective gloves 10,000 pairs (JUNDA brand or OEM). Disposable gloves are quoted by full container — 40HQ / 40GP / 20GP.
  • Samples: free. The buyer's own international courier collects from the Guangzhou factory and the buyer pays the courier directly. Contact us by email or WhatsApp before booking the collection.
  • Lead time: 15–30 days; the exact date is confirmed with the order.
  • Certificates: masked previews are on the Quality page; full documents are available on request. Logos or certification marks visible in artwork are not proof of current certification — always request the document itself.
  • Payment: terms follow the quotation and contract.

For the full set of buying terms, see /buying.

A short pre-quotation checklist

Before you contact any household cleaning gloves manufacturer, have these five answers ready. They shorten the quotation cycle considerably:

  1. Which channel is each SKU for — retail kitchen, household value pack, or janitorial contract?
  2. What cuff length and lining direction do you need per channel?
  3. What size mix and pair-bagging format do your customers expect?
  4. What is your target order quantity and can it ship as one container or must it be consolidated?
  5. Which destination port and Incoterm should the quotation use?

Send those five points by email or WhatsApp and the export team can respond with a specification-matched quotation rather than a generic price list.

This article was prepared with automation assistance and reviewed against Junda's product and export-content rules.